3/C CU 5kV 115 NLEPR 133% AIA PVC MV-105

3/C CU 5kV 115 NLEPR 133% AIA PVC MV-105

Type MV-105 Three Conductor Copper, 115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket
Download Category Specifications:
PDF Excel Table

Application

Southwire’s 5KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

measurement
imperial metric
Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
556605 3 3 2 AWG 2 AWG 7 7 115 2.92 6 6 1798 45.68 1804 2684
556613 3 3 1 AWG 1 AWG 19 19 115 2.92 4 4 1893 48.10 2085 3102
556621 3 3 1/0 AWG 1/0 AWG 19 19 115 2.92 4 4 1980 50.29 2328 3464
556639 3 3 2/0 AWG 2/0 AWG 19 19 115 2.92 4 4 2075 52.71 2736 4071
556647 3 3 3/0 AWG 3/0 AWG 19 19 115 2.92 3 3 2183 55.45 3186 4742
556654 3 3 4/0 AWG 4/0 AWG 19 19 115 2.92 3 3 2273 57.75 3706 5515
556662 3 3 250 KCMIL 250 KCMIL 37 37 115 2.92 2 2 2420 61.47 4566 6795
556670 3 3 350 KCMIL 350 KCMIL 37 37 115 2.92 2 2 2617 66.49 5754 8562
556688 3 3 500 KCMIL 500 KCMIL 37 37 115 2.92 1 1 2903 73.76 7641 11371
556696 3 3 750 KCMIL 750 KCMIL 61 61 115 2.92 1/0 1/0 3386 86.00 10511 15642

Standards & References

  • ASTM B3 Standard Specification for Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • UL 1072 Medium-Voltage Power Cables
  • UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Construction

  • Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  • Conductor Shield:Semi-conducting cross-linked copolymer
  • Insulation:115 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
  • Insulation Shield:Stripable semi-conducting cross-linked copolymer
  • Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  • Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
  • Filler:Wax paper filler
  • Binder:Polypropylene tape
  • Armor:Aluminum Interlocked Armor (AIA)
  • Overall Jacket:Polyvinyl Chloride (PVC)

Resources

There are no downloadable resources for this product.