3/C CU 2.4kV 115 EPR AIA PVC MV-105
Type MV-105 Three Conductor Copper, 115 Mils Ethylene Propylene Rubber (EPR) Aluminum Interlocked Armor (AIA), Polyvinyl Chloride (PVC) Jacket
Download Category Specifications
Excel Table
Application
Southwire’s 2.4KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 130°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.
Select a set of products below for more information:
| Conductor | Ground Wire | ||||||||
| No. of Conductors | Size (AWG or kcmil) | No. of Strands | Insulation Thickness (mils) (mm) | Size (AWG) | No. of Strands | Nom. OD (mils) (mm) | Nominal Total Weight (lbs/1000') (kgs/km) | Allowable Ampacity | |
| 890086 | 3 3 | 2 AWG 2 AWG | 7 7 | 90 2.29 | 6 6 | 1393 35.40 | 1278 1902 | ||
| 606467 | 3 3 | 1/0 AWG 1/0 AWG | 19 19 | 90 2.29 | 4 4 | 1699 43.16 | 1918 2855 | ||
| 552212 | 3 3 | 2/0 AWG 2/0 AWG | 19 19 | 90 2.29 | 4 4 | 1796 45.63 | 2258 3360 | ||
| 552213 | 3 3 | 4/0 AWG 4/0 AWG | 19 19 | 90 2.29 | 3 3 | 1991 50.57 | 3119 4641 | ||
| 551526 | 3 3 | 350 KCMIL 350 KCMIL | 37 37 | 90 2.29 | 2 2 | 2349 59.66 | 4805 7151 | ||
| 890645 | 3 3 | 500 KCMIL 500 KCMIL | 37 37 | 90 2.29 | 1 1 | 2619 66.52 | 6483 9648 | ||
| 552256 | 3 3 | 750 KCMIL 750 KCMIL | 61 61 | 90 2.29 | 1/0 1/0 | 3089 78.48 | 9230 13736 | ||
Standards & References
- ASTM B3 Standard Specification for Soft or Annealed Copper Wire
- ASTM B8 Concentric-Lay-Stranded Copper Conductors
- UL 1072 Medium-Voltage Power Cables
- UL 1685 FT4 Vertical-Tray Fire Propagation and Smoke Release Test
- ICEA S-96-659 (NEMA WC 71) 2001-5000 V Nonshielded Cables
- IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test
Construction
- Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
- Conductor Shield:Semi-conducting cross-linked copolymer
- Insulation:115 Mils Ethylene Propylene Rubber (EPR)
- Grounding Conductor:Class B compressed stranded bare copper ground per ASTM B3 and ASTM B8
- Filler:Wax paper filler
- Binder:Polypropylene tape
- Armor:Aluminum Interlocked Armor (AIA)
- Overall Jacket:Polyvinyl Chloride (PVC)
Resources
There are no downloadable resources for this product.