3/C CU 15kV 220 NLEPR 133% PVC MV-105. Silicone Free

Type MV-105 Three Conductor Copper, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA. Silicone Free

Download Category Specifications
PDF Excel Table

Application

Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerially supported by a messenger and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. For uses in Class I and II, Division 2 hazardous locations per NEC Article 501 and 502.Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
956490
3 3
2 AWG 2 AWG
7 7
220 5.59
6 6
2032 51.62
2236 3328
958306
3 3
1/0 AWG 1/0 AWG
19 19
220 5.59
4 4
2215 56.28
2759 4105
956284
3 3
4/0 AWG 4/0 AWG
19 19
220 5.59
3 3
2516 63.91
4289 6382
558288
3 3
250 KCMIL 250 KCMIL
37 37
220 5.59
2 2
2628 66.76
4815 7166
958322
3 3
350 KCMIL 350 KCMIL
37 37
220 5.59
2 2
2935 74.56
6213 9247
958330
3 3
500 KCMIL 500 KCMIL
37 37
220 5.59
1 1
3162 80.33
7973 11866

Standards & References

Construction

Resources

There are no downloadable resources for this product.