Cable Pulling & Fishing

Maxis XD10 Extreme Duty Cable Puller 1 EA

Southwire #: 59190402 Model #: XD10

Write a Review

The Maxis® XD10 EXTREME Duty Cable Puller is designed to get the job done, thriving in the most extreme pulling conditions. The XD10 allows you to pull faster and safer up to 10,000 lbs.

Where to Buy

Download Category Specifications

PDF Excel Table

Maxis XD10 Extreme Duty Cable Puller 1 EA

Features & Benefits

FORK TUBES
Mid-Frame extended and retracted positions: easily moves through 90 degree bends.
High capacity: powerful gear box designed to operate under heavy loads with maximum output.
Vertical capstan design: improved rope guide reduces binding with most rope types and sizes.
Elevation control: high quality 5:1 geared elevation control requires only 5 lb. of force for smooth operation.
Smooth Elevation Control: operates with handle or 18V cordless drill helping to eliminate any lifting
Gear reducer design allows for increased efficiency, durability and power while maintaining low operating temperature
10,000 lbs. peak pulling force with a continuous pulling rating of 7,000 lbs
Fixed Caster Brakes aid in set up and positioning
Includes single foot control

Specifications

Model #	XD10 XD10
UPC #	032886951664 032886951664
Product Height	40.0 101.60	inch cm
Product Width	26.0 66.04	inch cm
Depth	70.0 177.80	inch cm
Rated Capacity	6,500 LBS + 6,500 LBS +

Resources

XD10 Exploded Diagrams

XD10 Operating Manual

Trying to find a part for my maxis tugger having a hard time finding it

Asked by: Will2224

Please call our Tools Team at 855-798-6657 for further assistance!

Answered by: SW Tools

Date published: 2019-08-19

Trying to find a part for my tugger

Asked by: Will2224

Please call our Tools Team at 855-798-6657 for further assistance!

Answered by: SW Tools

Date published: 2019-08-19

where can I buy replacement parts, several of the conduit adapters in my set have been damaged buy a swivel getting caught as the wire was nosing out.

Asked by: ron dwy

Please call our Tools Team at 855-798-6657 for further assistance!

Answered by: SW Tools

Date published: 2019-08-01

Where can i get a parts breakdown of this Tugger

Asked by: kellyB

Please call our Tools Team at 855-798-6657 for further assistance!

Answered by: SW Tools

Date published: 2019-07-31

Where can I get a 4” sleeve for xd10 tugger

Asked by: Ace kid

Please see the link below to our Where to Buy page or call 855-798-6657 and a member of our team can help you find a distributor in your area! http://www.southwiretools.com/tools/basic/wheretobuy

Answered by: SW Tools

Date published: 2019-07-31

how does this tugger compare to the itool 10k tugger?

Asked by: jprice

The XD10 is a true 10,000 lb. puller.

Answered by: Southwire

Date published: 2019-09-06

Does it have a reverse in the case of a baclklash?

Asked by: Puller

No, it does not have a reverse.

Answered by: Southwire

Date published: 2019-09-06

Do you sell the front pulley wheel? Part # P-10-208-52? The bearings are gone on ours and we need it replaced ASAP.

Asked by: Jill Schrader

Yes, this part is available. Please contact tools customer service 855-SWTOOLS (855-798-6657)

Answered by: Southwire

Date published: 2020-02-21

Do you offer replacement contacts for the foot pedal?

Asked by: VenomF5

We do not offer replacement parts but please contact tools customer service 855-SWTOOLS (855-798-6657) to see if your unit qualifies for a warranty replacement.

Answered by: Southwire

Date published: 2019-01-21

Is there a reverse feature?

Asked by: Boosan16

Yes, there is a reverse feature on the motor.

Answered by: Southwire

Date published: 2018-12-11

Southwire Maxis XD10 - Serial# SW15-322: Where do we acquire a seal for the Motovario rope reel shaft. We have a major leak and would like to acquire service and parts manual.

Asked by: Dennis Moats

We are happy to help, please call our Tools Team at 855-798-6657 for further assistance!

Answered by: Southwire

Date published: 2018-11-15

For the Maxus XD10 cable puller what is the full load amps on the motor on high speed and low speed?

Asked by: Larv

The XD10 motor is rated at 120V/20A. Thank you.

Answered by: SouthwireTools

Date published: 2018-11-08

Does it have a force gauge? 

Asked by: Rocky

The Southwire XD10 works in conjunction with Triggers® safety switches, to provide a pull force gauge. Please contact Southwire Tools 1(855)SW TOOlS (1-855-798-6657) with any setup questions.

Answered by: SouthwireTools

Date published: 2020-12-29

How much does equipment cost?

Asked by: Jenn

Hi Jenn, Please contact our customer service team at 1-855-798-6657 for pricing information. Thank you.

Answered by: SouthwireTools

Date published: 2017-03-14

do you make a conduit adapter that fits outside of the conduit? We are having issues with pre nosed wire catching on the adaptor as it exits conduit while pulling 4 500mcm in a 3" conduit

Asked by: old timer

Southwire’s two piece conduit adapter has an inner sleeve that is removed by taking out two allen screws near the top of the unit. Once removed the conduit adapter sits outside the pipe. Please contact us at 1-855-798-6657 for more information.

Answered by: SouthwireTools

Date published: 2020-12-29

Can this be used to pull large mc feeders? Bolted down to floor? or just wire in conduit?

Asked by: steven

Southwire XD10 Can be used in a bolt down configuration when paired with its Bolt Down Adapter. Please see the XD10 Spec Sheet for more information on this product.

Answered by: SouthwireTools

Date published: 2018-05-16

It is sold individually Gearbox?

Asked by: Saleh

The gearbox can be purchased as a replacement part, please contact 1(855)-798-6657 for more information.

Answered by: SouthwireTools

Date published: 2016-10-31

what is the kind and make of Oil Go,s in The Gear Box ?

Asked by: Roop

Please call our customer service team at 1-855-798-6657 for assistance with this.

Answered by: SouthwireTools

Date published: 2020-12-29

Maxis XD10 Extreme Duty Cable Puller 1 EA

The Maxis® XD10 EXTREME Duty Cable Puller is designed to get the job done, thriving in the most extreme pulling conditions. The XD10 allows you to pull faster and safer up to 10,000 lbs.

Features & Benefits

Specifications

Resources

Trying to find a part for my maxis tugger having a hard time finding it

Trying to find a part for my tugger

where can I buy replacement parts, several of the conduit adapters in my set have been damaged buy a swivel getting caught as the wire was nosing out.

Where can i get a parts breakdown of this Tugger

Where can I get a 4&rdquo; sleeve for xd10 tugger

how does this tugger compare to the itool 10k tugger?

Does it have a reverse in the case of a baclklash?

Do you sell the front pulley wheel? Part # P-10-208-52? The bearings are gone on ours and we need it replaced ASAP.

Do you offer replacement contacts for the foot pedal?

Is there a reverse feature?

Southwire Maxis XD10 - Serial# SW15-322: Where do we acquire a seal for the Motovario rope reel shaft. We have a major leak and would like to acquire service and parts manual.

For the Maxus XD10 cable puller what is the full load amps on the motor on high speed and low speed?

Does it have a force gauge?&nbsp;

How much does equipment cost?

do you make a conduit adapter that fits outside of the conduit? We are having issues with pre nosed wire catching on the adaptor as it exits conduit while pulling 4 500mcm in a 3&quot; conduit

Can this be used to pull large mc feeders? Bolted down to floor? or just wire in conduit?

It is sold individually Gearbox?

what is the kind and make of Oil Go,s in The Gear Box ?

Where can I get a 4” sleeve for xd10 tugger

Does it have a force gauge?

do you make a conduit adapter that fits outside of the conduit? We are having issues with pre nosed wire catching on the adaptor as it exits conduit while pulling 4 500mcm in a 3" conduit