1/C CU EPR Medium Voltage Non-Shielded Jumper & Switchgear Cable

Single Conductor Flexible Conductor with an EPR Insulation Non-Shielded Jumper Cable

Download Category Specifications
PDF Excel Table

Application

Southwire’s medium voltage non-shielded jumper and switchgear cable is a flexible power cable that is intended for use in substations installed on insulators and inside switchgear isolated from ground and where a non-shielded flexible cable is desired. These cables are capable of operating continuously at a conductor temperature not in excess of 90°C. See Table 2 for installation guidelines. This cable is rated up to 40KV and is not UL listed.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
569424
0 0
2 AWG 2 AWG
168 168
753 19.13
432 643
569423
0 0
1/0 AWG 1/0 AWG
259 259
840 21.34
548 816
569425
0 0
2/0 AWG 2/0 AWG
324 324
883 22.43
674 1003
569487
0 0
4/0 AWG 4/0 AWG
532 532
979 24.87
961 1430
569427
0 0
350 KCMIL 350 KCMIL
893 893
1160 29.46
1475 2195
569428
0 0
500 KCMIL 500 KCMIL
1221 1221
1350 34.29
1970 2932

Standards & References

Construction

Resources

There are no downloadable resources for this product.