1/C CU 15kV 220 NLEPR 133% SIMpull® PVC MV-105

Type MV-105 Single Conductor Copper, 220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA

Download Category Specifications
PDF Excel Table

Application

Southwire’s 15KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
955989
1 1
1/0 AWG 1/0 AWG
19 19
220 5.59
1080 27.43
816 1215
955997
1 1
2/0 AWG 2/0 AWG
19 19
220 5.59
1124 28.55
930 1384
956003
1 1
3/0 AWG 3/0 AWG
19 19
220 5.59
1174 29.82
1070 1592
956011
1 1
4/0 AWG 4/0 AWG
19 19
220 5.59
1230 31.24
1243 1849
956029
1 1
250 KCMIL 250 KCMIL
37 37
220 5.59
1284 32.61
1399 2082
956037
1 1
350 KCMIL 350 KCMIL
37 37
220 5.59
1387 35.23
1775 2642
956045
1 1
500 KCMIL 500 KCMIL
37 37
220 5.59
1492 37.90
2308 3434
643755
1 1
600 KCMIL 600 KCMIL
61 61
220 5.59
1576 40.03
2677 3983
956052
1 1
750 KCMIL 750 KCMIL
61 61
220 5.59
1764 44.81
3323 4945
956060
1 1
1000 KCMIL 1000 KCMIL
61 61
220 5.59
1913 48.59
4203 6254
567443
1 1
1500 KCMIL 1500 KCMIL
91 91
220 5.59
2230 56.64
6006 8939
550811
1 1
2000 KCMIL 2000 KCMIL
127 127
220 5.59
2443 62.05
7716 11483

Standards & References

  • ASTM B3 Standard Specification for Soft or Annealed Copper Wire
  • ASTM B8 Concentric-Lay-Stranded Copper Conductors
  • UL 1072 Medium-Voltage Power Cables
  • UL 1685 FT4-ST1 Vertical-Tray Fire Propagation and Smoke Release Test (1/0 and Larger)
  • CSA C22.2 No.230 Tray Cables - Rated TC-ER (1/0 AWG and Larger)
  • CSA C22.2 No. 2556 / UL 2556 Cable Test Methods
  • CSA C68.10 Shielded Power Cables for Commercial and Industrial Applications - 5 to 46 KV
  • ICEA S-93-639 (NEMA WC 74) 5-46 KV Shielded Power Cable
  • IEEE 1202 FT4 Flame Test (70,000) BTU/hr Vertical Tray Test (1/0 and Larger)
  • AEIC CS-8 Specification for extruded dielectric shielded power cables rated for 5 through 46KV

Construction

  • Conductor:Class B compressed stranded bare copper per ASTM B3 and ASTM B8
  • Conductor Shield:Semi-conducting cross-linked copolymer
  • Insulation:220 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 133% Insulation Level,
  • Insulation Shield:Stripable semi-conducting cross-linked copolymer
  • Copper Tape Shield:Helically wrapped 5 mil copper tape with 25% overlap
  • Overall Jacket:Polyvinyl Chloride (PVC)