1/C CU 35kV 345 NLEPR 100% SIMpull® PVC MV-105

Type MV-105 Single Conductor Copper, 345 Mils No Lead Ethylene Propylene Rubber (NL-EPR) 100% Insulation Level, Tape Shield, SIMpull Polyvinyl Chloride (PVC) Jacket, Dual Rated UL/CSA

Download Category Specifications
PDF Excel Table

Application

Southwire’s 35KV cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. Rated at -35°C for cold bend. ST1 (low smoke) Rated for sizes 1/0 and larger. PVC jacket is made with SIM technology and has a coefficient of friction COF of 0.2. Cable can be installed in conduit without the aid of lubrication. Rated for 1000 lbs./FT maximum sidewall pressure.

Specifications

Select a set of products below for more information:
Conductor Ground Wire
No. of Conductors Size (AWG or kcmil) (mm2) No. of Strands Insulation Thickness (mils) (mm) Size (AWG) No. of Strands Nom. OD (mils) (mm) Nominal Total Weight (lbs/1000') (kgs/km) Allowable Ampacity
555839
1 1
1/0 AWG 1/0 AWG
19 19
345 8.76
1330 33.78
1073 1597
599364
3 3
1/0 AWG 1/0 AWG
19 19
345 8.76
4 4
2805 71.27
3935 5856
555847
1 1
2/0 AWG 2/0 AWG
19 19
345 8.76
1374 34.90
1195 1779
555854
1 1
3/0 AWG 3/0 AWG
19 19
345 8.76
1424 36.17
1345 2001
555862
1 1
4/0 AWG 4/0 AWG
19 19
345 8.76
1480 37.59
1527 2273
555870
1 1
250 KCMIL 250 KCMIL
37 37
345 8.76
1565 39.75
1742 2593
551986
1 1
350 KCMIL 350 KCMIL
37 37
345 8.76
1637 41.58
2091 3111
555888
1 1
500 KCMIL 500 KCMIL
37 37
345 8.76
1802 45.77
2744 4083
957316
1 1
750 KCMIL 750 KCMIL
61 61
345 8.76
2014 51.16
3714 5528
608992
1 1
1000 KCMIL 1000 KCMIL
61 61
345 8.76
2163 54.94
4624 6881

Standards & References

Construction

Resources

There are no downloadable resources for this product.