6-6-6-6 3E AL SERVICE ENTRANCE TYPE SER PVC JACKET 1000 FT
Type SE and Style SER Service Entrance Cable. 600 Volt. Alumaflex® Brand Aluminum Alloy (AA-8176) Conductors. Individual Conductors Rated THHN/THWN-2 Jacket and Inner Conductors are Sunlight Resistant.
Application
Southwire Type SE, service entrance cable is used to convey power from the service drop to the meter base and from the meter base to the distribution panelboard however, it may be used in all applications where Type SE cable is permitted. SE may be used in wet or dry above ground locations at temperatures not to exceed 90°C. The voltage rating is 600 volts.
Specifications
| Stock # | 13099701 13099701 | |
| Size (AWG or kcmil) (mm2) | 6 AWG 6 AWG | |
| No. of Conductors | 3 3 | |
| No. of Strands | 7 7 | |
| Size (AWG) | 6 6 | |
| No. of Neutrals | 1 1 | |
| No. of Strands | 7 7 | |
| Nom. OD (mils) (mm) | 651 16.56 | mils mm |
| Nominal Total Weight (lbs/1000') (kgs/km) | 187 279 | lbs/1000' kgs/km |
| Allowable Ampacity at 60C | 40 40 | |
| Allowable Ampacity at 75C | 50 50 | |
| Allowable Ampacity at 90C | 60 60 | |
| UPC # | 032886584565 032886584565 |
Standards & References
Southwire Type SE cable complies with the following:
- ASTM- B-800 and B-801
- UL Standard 83 for THHN/THWN-2
- Federal Specification A-A-59544
- National Electrical Code, NFPA 70, 2011 Edition
- RoHS
Construction
Southwire Type SE cable is constructed with Alumaflex® AA-8000 series aluminum alloy, compacted stranded conductors. The conductors are covered with a sunlight resistant Type THHN/THWN-2-insulation. A reinforcement tape is wrapped around the conductors for added strength and conformity. A gray sunlight-resistant polyvinyl chloride (PVC) outer jacket covers the entire assembly. Three phase conductors and a bare neutral
