Southwire Type SIMpull XHHW-2 conductors are primarily used in conduit or other recognized raceways for services, feeders, and branch circuit wiring, as specified in the 2008 National Electrical Code. SIMpull XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90° C. Voltage rating for XHHW-2 conductors is 600 volts. Suitable for use in anesthetizing locations per article 517.160 of the NEC where a dielectric constant of 3.5 or less is required. This cable can be installed without the need for pulling lubricant.

/images/product_buttons/xhhw_copper_button.gifSIM<i>pull</i> XHHW-21SIMpull CU-XHHW ™XHHW.htm
ENU
Register Now Forgot Password?

SIMpull CU-XHHW ™

SIM<i>pull</i> XHHW-2
  • 600 Volt
  • Copper conductor
  • Cross-linked polyethylene (XLP) insulation
  • High-heat and moisture resistant
  • SIM Technology® for easier pulling

Applications

Southwire Type SIMpull XHHW-2 conductors are primarily used in conduit or other recognized raceways for services, feeders, and branch circuit wiring, as specified in the 2008 National Electrical Code. SIMpull XHHW-2 conductors may be used in wet or dry locations at temperatures not to exceed 90° C. Voltage rating for XHHW-2 conductors is 600 volts. Suitable for use in anesthetizing locations per article 517.160 of the NEC where a dielectric constant of 3.5 or less is required. This cable can be installed without the need for pulling lubricant.