The Dead-end Brackets are designed to support a single circuit,spacer cable system as it terminates at a structure or as it proceeds through a turn with an angle of greater than 90 degrees. The brackets will maintain the orientation of the spacer cable system through the turn or for transition to a more conventional bare overhead system. The bracket will hold a variety of dead-end clamps and insulators and is compatible and interchangeable with other manufacturers components.

/images/product_buttons/DeadendBracket_button.gifDead-end Bracket103Dead-end BracketDeadendBracket.htm
ENU
Register Now Forgot Password?

Dead-end Bracket

Dead-end Bracket
  • Manufactured from high strength structural steel
  • Corrosion resistant
  • Allows for compact configuration for dead-ending
  • Drilled for use on standard utility poles
  • Uses Standard "C" Bracket and Angle Cross Arm increasing part interchangeability

Applications

The Dead-end Brackets are designed to support a single circuit,spacer cable system as it terminates at a structure or as it proceeds through a turn with an angle of greater than 90 degrees. The brackets will maintain the orientation of the spacer cable system through the turn or for transition to a more conventional bare overhead system. The bracket will hold a variety of dead-end clamps and insulators and is compatible and interchangeable with other manufacturers components.